1. When the marine board is unloaded, use four rafts with a height of about 100mm at the bottom of the sheet. The sheet should not be placed directly on the ground. The height of the sheet should not exceed two meters.
2. The marine board should be stored in an environment that avoids direct sunlight, dryness and ventilation.
3. When the marine board is pasted with various finishing materials on the surface of the board, please clean the surface of the board with dust, dirt, oil stains, etc., then polish it with 360# woodworking sandpaper, and paste it with professional adhesive for facing materials. If the air humidity is greater than 80%, it is not suitable for the construction of the pasting facing material.
4. When processing marine plates, it is recommended to take a few sheets of materials before testing. If it is caused by unnecessary mass production without trial, it is not within the scope of responsibility.Back